Cura -- reasonable Anti Warping pad Settings
These settings seem to produce a reasonable result for the
plugins.
Spoon Anti Warping
UPDATE: the «Tab+ AntiWarping» has some limitations when support structures are being used. «Spoon Anti-Warping» is fixing these problems and also let’s you place the pads manually if needed.
Tab+ AntiWarping
| Key | Value |
|---|---|
| Size | 8 mm |
| X/Y Distance | 0.12 mm |
| Number of Layers | 3 |
| Define as Capsule | ✓ |
| Set On Adheson Area | ✗ |